DTSB, DTXB
Digital wire Tension Meter Cylindrical Roller Correctly Measures Tape Tension
The principle of the broadband line tension meter is that the tape to be measured passes through three cylindrical rollers, and the middle measuring wheel senses the tension. It is applicable to the tape while it is traveling or in a static state. The position of the thumb push block of the digital line tension meter is different from that of the pointer type, and has three position functions. Different.
Features
10 Tension ranges available
from 5.0 - 500 cN up to 2.5 - 50 daN / Stationary electronic tension sensor for measuring tensions of textile ribbons, films, foils, fibre bunches etc. / Cylindrical tape rollers with up to max. 41 mm width, one-sided mounting / Tension meter with many functions as turnable display, thickness compensation and possibility of custom made calibrations Special Features
Dual-flanged outer guide rollers with various widths, from 7 mm to 41 mm (single-flanged rollers optional, recommendable if the material being measured is wider than the tape roller)
Tension meter DTSB with large, backlight LCD-display
3 different display modes:
– numeric
– numeric with bargraph
– numeric with graph (Time-Tension)
The display rotates in 90° steps for better reading / New, unique, force reduced material catching system / The tension meter has no material thickness compensator / Automatic „Zero-Setting“ in each measuring position using a special sensor technique / 4 Material memory locations for customer made calibrations / Calibration adjustment for fine tuning of the calibration if material differs from the used calibration material / Programmable MIN- and MAX alarms: indication in the display, if reading is out of limits / High speed data sampling (internal 8 kHz) and recording of MIN-, MAX-, last reading, PEAKS, average and standard deviation/ Selectable units of measurement: cN, daN, g, kg, N, lb / Menu set-up in English or German language / Flexible menu set-up to meet operators demand / Some functions can be password protected
Note: Tension meter DTXB offers additional features, like interface, statistical evaluation on PC and a large internal memory. Standard Features Everything in operator's view:
– the guide rollers
– the measured material
– the readings
Roller shifting mechanism ensure easy acquisition of the running material / Ball-bearing mounted, tape rollers / Rubberized handle provides a secure hold in the operators' hand Tension meter with rugged aluminium housing / LiPo accumulator (approx. 40 hours continuous operation) with AC adapter / CE certified, interference resistant against static electrifications Certificate of Compliance with the order 2.1 according EN 10204 is included / Optionally available: Inspection Certificate 3.1 according EN 10204 with calibration report
When selecting the instrument for your specific application, please keep in mind that:
1. Rollers of different widths are not interchangeable by the user.
2. The roller width should correspond with the width of the material to be measured.
Otherwise incorrect measuring results may occur and the instrument may be damaged.
We have the solution to any tension measuring problem! Please contact us to discuss your application requirements.
To assist you in selecting the right tension meter for your specific application, please furnish:
– Kind and dimensions of the material to be measured
– Expected tension range
– Material sample of about 5 m
from 5.0 - 500 cN up to 2.5 - 50 daN / Stationary electronic tension sensor for measuring tensions of textile ribbons, films, foils, fibre bunches etc. / Cylindrical tape rollers with up to max. 41 mm width, one-sided mounting / Tension meter with many functions as turnable display, thickness compensation and possibility of custom made calibrations Special Features
Dual-flanged outer guide rollers with various widths, from 7 mm to 41 mm (single-flanged rollers optional, recommendable if the material being measured is wider than the tape roller)
Tension meter DTSB with large, backlight LCD-display
3 different display modes:
– numeric
– numeric with bargraph
– numeric with graph (Time-Tension)
The display rotates in 90° steps for better reading / New, unique, force reduced material catching system / The tension meter has no material thickness compensator / Automatic „Zero-Setting“ in each measuring position using a special sensor technique / 4 Material memory locations for customer made calibrations / Calibration adjustment for fine tuning of the calibration if material differs from the used calibration material / Programmable MIN- and MAX alarms: indication in the display, if reading is out of limits / High speed data sampling (internal 8 kHz) and recording of MIN-, MAX-, last reading, PEAKS, average and standard deviation/ Selectable units of measurement: cN, daN, g, kg, N, lb / Menu set-up in English or German language / Flexible menu set-up to meet operators demand / Some functions can be password protected
Note: Tension meter DTXB offers additional features, like interface, statistical evaluation on PC and a large internal memory. Standard Features Everything in operator's view:
– the guide rollers
– the measured material
– the readings
Roller shifting mechanism ensure easy acquisition of the running material / Ball-bearing mounted, tape rollers / Rubberized handle provides a secure hold in the operators' hand Tension meter with rugged aluminium housing / LiPo accumulator (approx. 40 hours continuous operation) with AC adapter / CE certified, interference resistant against static electrifications Certificate of Compliance with the order 2.1 according EN 10204 is included / Optionally available: Inspection Certificate 3.1 according EN 10204 with calibration report
When selecting the instrument for your specific application, please keep in mind that:
1. Rollers of different widths are not interchangeable by the user.
2. The roller width should correspond with the width of the material to be measured.
Otherwise incorrect measuring results may occur and the instrument may be damaged.
We have the solution to any tension measuring problem! Please contact us to discuss your application requirements.
To assist you in selecting the right tension meter for your specific application, please furnish:
– Kind and dimensions of the material to be measured
– Expected tension range
– Material sample of about 5 m
Specification
| DTSB | DTXB | Tension range* | Mix. | Head width** mm | Roller width mm |
| DTSB-500 | DTXB-500 | 5.0- 500.0 cN | 0.1 cN | 55 | 7, 10, 15, 20, 30 |
| DTSB-1000 | DTXB-1000 | 50- 1000 cN | 1 cN | 55 | 7, 10, 15, 20, 30, 41 |
| DTSB-2000 | DTXB-2000 | 100-2000 cN | 1 cN | 55 | 7, 10, 15, 20, 30, 41 |
| DTSB-2500 | DTXB-2500 | 150-2500 cN | 1 cN | 117 | 7, 10, 15, 20, 30, 41 |
| DTSB-4000 | DTXB-4000 | 200- 4000 cN | 1 cN | 55 | 7, 10, 15, 20, 30, 41 |
| DTSB-5000 | DTXB-5000 | 250- 5000 cN | 1 cN | 117 | 7, 10, 15, 20, 30, 41 |
| DTSB-10K | DTXB-10K | 0.5- 10.00 daN | 0.01 daN | 117 | 7, 10, 15, 20, 30 |
| DTSB-20K | DTXB-20K | 1.0- 20.00 daN | 0.01 daN | 167 | 7, 10, 15, 20, 30 |
| DTSB-30K | DTXB-30K | 1.5- 30.00 daN | 0.01 daN | 217 | 7, 10, 15 |
| DTSB-50K | DTXB-50K | 2.5- 50.00 daN | 0.01 daN | 217 | 7, 10 |
| Roller width | Line speed v max ..m/min |
Roller Material* |
| 7 mm | 1000 | Hard-coated aluminium |
| 10 mm | 1000 | Hard-coated aluminium |
| 15 mm | 1000 | Hard-coated aluminium |
| 20 mm | 1000 | Hard-coated aluminium |
| 30 mm | 1000 | Hard-coated aluminium |
Specification
| Calibration: | According SCHMIDT factory procedure |
| Accuracy: | From 5 % up to 100 % FS*: ± 0.5 % FS* ± 1 digit remaining tension range and other calibration materials: ±3 % full scale and ±1 digit |
| Memory for material curves: | 1 for SCHMIDT calibration plus 10 for customized calibrations |
| Measuring units: | Force (switchable): cN, daN, g, kg, N, lb Thickness (switchable): mm, inch |
| Overrange: | Approx. 10 % FS*, full scale, without accuracy guarantee |
| Overload protection: | 100 % full scale |
| Measuring principle: | Strain gauge bridge |
| Signal processing: | Digital, 16 bit A/D converter |
| Measuring frequency: | Max. 1 kHz (1000 measurings/sec.), intern 8 kHz |
| Measuring roller deflection: | Max. 0.2 mm |
| Display: | Graph LCD |
| 3 different displays: | Numeric Numeric with bargraph Numeric with graph (time-tension) |
| Display update rate: | Approx. 2 times per second |
| Memory: | MIN, MAX, PEAK, AVG and LAST |
| (DTXB Series) Output signal: | USB |
| (DTXB Series) Memory: | 60.000 values split up to 255 measuring positions |
| (DTXB Series) Memory modes: | 4 memory modes with statistical evaluation |
| Damping: | Adjustable electronic damping (averaging) |
| Cal. Adjustment: | ± 10 steps in 1 % increment |
| Thickness compensation: | Max. 2.5 mm (not available for all models) |
| Auto power off: | Approx. 3 minutes of non-use |
| Temperature coeffizient: | Gain: less than ± 0.01 % FS* /°C |
| Zero point: | less than ± 0.03 % FS* /°C |
| Temperature range: | 10 – 45 °C |
| Air humidity: | 85 % RH, max. |
| Power supply: | LiPo accumulator (approx. 40 h continous use), charging time approx. 3 1/2 h AC adapter 100 – 240 V AC, adapter (EU, USA, UK) |
| Housing material: | Die-cast aluminium |
| Housing dimensions: | see Dimensions |
| Weight, net (gross): | Approx. 875 g / 1550 g |
Specifications subject to change without notice!
