CTM
Electronic wire cable tension meter facilitates inspection of hanging fixation frame wire ropes
The CTM is a simple, accurate wire rope dynamometer that clamps onto a cable, accurately measures cable tension and is cleared in seconds. The CTM can handle a variety of wire diameters, and it can display instant tension, Graphical display of both trace/peak tension, average tension obtained from multiple inspections and check tension.
Features
Electronic wire rope tension meter to determine the tension of overhead lines, tensioning ropes, contact wires, aerials, etc. up to max. Ø25.4 mm (1 inch) . This hand-held unit is used for control and comparision measurement of pretensioned, non running ropes.
Tension meter with large easy to read LCD display tension meter CTM for measurement of pretensioned non running ropes
Special Features
Standard Features
Rugged device, designed for outdoor use
Telescope handle
Battery operation
Tension meter with large easy to read LCD display tension meter CTM for measurement of pretensioned non running ropes
Special Features
- Tension meter for rope diameters from 4.75 up to 25.4 mm (3/16 up to 1 inch)
- Switchable units kN, lbf, kgf
- The reading is shown directly in the display; their is no need for comparison tables
- Large easy to read LCD display; the reading is 2.54 cm high.
- Delivery includes calibration for one material. Calibrations for 20 different materials can be saved.
- RS 232 interface for data transfer to PC
- Unit with internal memory. Readings can be transfered at a later date to PC
- Automatic zero setting independent to measuring position
Standard Features
Rugged device, designed for outdoor use
Telescope handle
Battery operation
Specification
Available Models
Guide Rollers
Specifications
Specifications subject to change without notice!
Model | Measuring Range | ||
CTM-2000 | 10 kN | 2000 lbf | 1000 kgf |
CTM-10000 | 45 kN | 10000 lbf | 4500 kgf |
Guide Rollers
Model | Rope Diameter mm | Rope Diameter inch |
CTM-SH-L | 4.75 - 6.35 | 3/16 - 1/4 |
CTM-SH-P | 4.75 - 12.7 | 3/16 - 1/2 |
CTM-SH-S | 6.35 - 19.05 | 1/4 - 3/4 |
CTM-SH-T | 12.7 - 25.4 | 1/2 - 1 |
Specifications
Accuracy: | ± 3 % full scale |
Measuring unit: | N, lbf, kgf switchable |
Material diameter: | 4.75 - 25.4 mm (3/16 - 1 inch) |
Display: | LCD 2.54 cm high, full text prompts |
Numbers of calibrations: |
Up to 15 calibrations can be saved |
Resolution: | CTM-2000: low (50 N/10 lbf/5 kgf), middle (20 N/5 lbf/2 kgf), high (10 N/2 lbf/1 N) |
CTM-10000: low (200 N/50 lbf/20 kgf), middle (100 N/20 lbf/10 kgf), high (50 N/10 lbf/5 kgf) |
|
Power supply: | 2 batteries, size AA |
Temperature range: | -20 - 60 °C |
Dimensions: | 61 x 24 x 8 cm, 76.5 x 24 x 8 cm |
Weight, net (gross): | Approx. 5.7 kg (approx. 9.5 kg) |
Specifications subject to change without notice!