DTSE,DTXE
Narrow head thread tension counting position is specially used for thin threads in narrow spaces.
To use this digital wire tension meter in a limited space with digital display and output
Features
4 Tension ranges available
from 1 - 200 cN up to 20 - 2000 cN
For applications in textile industry up to max. 2000 tex or wire industry for Cu wire up to 0.5 mm Ø
Electronic tension meter with small measuring head, for applications with limited access space or where filaments run close together
Model DTSE Tension meter with many functions as turnable display, thickness compensation and possibility of custom made calibrations
Model DTXE Tension meter with various helpful functions for detailed data recording and analyse - Professional Instrument!
Special Features
Small measuring head width with of only 36 mm for measurements at positions with limited space
Turned-up outer finger edges guide the running filament into the roller grooves
Length of measuring head approx. 64 mm
Small, ball-bearing mounted, V-grooved guide rollers
Calibration with Polyamide Monofilament (PA)
Tension meter DTSE with large, backlight LCD-display
3 different display modes:
- numeric
- numeric with bargraph
- numeric with graph (Time-Tension)
The display rotates in 90° steps for better reading
New, unique, force reduced material catching system
Automatic „Zero-Setting“ in each measuring position using a special sensor technique
4 Material memory locations for customer made calibrations
Calibration adjustment for fine tuning of the calibration if material differs from the used calibration material
Programmable MIN- and MAX alarms: indication in the display, if reading is out of limits
High speed data sampling (internal 8 kHz) and recording of MIN-, MAX-, last reading, PEAKS, average and standard deviation
Selectable units of measurement: cN, daN, g, kg, N, lb
Menu set-up in English or German language
Flexible menu set-up to meet operators demand
Some functions can be password protected
Note：Tension meter DTXE offers additional features, like interface, statistical evaluation on PC and a large internal memory.
Additional functions in comparison to basic instrument DTSE
Memory for 60.000 readings
USB interface
Tension meter DTXE with 5 different memory modes:
Mode S：statistics only
Mode H：storage of the X-Y-diagram for reviewing after finishing a series of measurement (e.g. short time spooling)
Mode C：continuous logging over a user set time and different series of measurement (2 Hz)
Mode F： fast, continuous logging over a user set time and different series of measurement (1000 Hz)
Mode D：storage of single readings and statistic
10 Material memory locations for customer made calibrations
Software Tension Inspect 3 for displaying real-time readings on a PC and to store them into a file
Wi-Fi module for wireless communication with a PC (optional)
Standard Features
Everything in operator's view:
– the guide rollers
– the measured material
– the readings
Filament guide and roller shifting mechanism ensure easy acquisition of the running material
Rubberized handle provides a secure hold in the operators' hand
Tension meter with rugged aluminium housing
LiPo accumulator (approx. 40 hours continuous operation) with AC adapter
CE certified, interference resistant against static electrifications
Certificate of Compliance with the order 2.1 according EN 10204 is included
Optionally available: Inspection Certificate 3.1 according EN 10204 with calibration report
from 1 - 200 cN up to 20 - 2000 cN
For applications in textile industry up to max. 2000 tex or wire industry for Cu wire up to 0.5 mm Ø
Electronic tension meter with small measuring head, for applications with limited access space or where filaments run close together
Model DTSE Tension meter with many functions as turnable display, thickness compensation and possibility of custom made calibrations
Model DTXE Tension meter with various helpful functions for detailed data recording and analyse - Professional Instrument!
Special Features
Small measuring head width with of only 36 mm for measurements at positions with limited space
Turned-up outer finger edges guide the running filament into the roller grooves
Length of measuring head approx. 64 mm
Small, ball-bearing mounted, V-grooved guide rollers
Calibration with Polyamide Monofilament (PA)
Tension meter DTSE with large, backlight LCD-display
3 different display modes:
- numeric
- numeric with bargraph
- numeric with graph (Time-Tension)
The display rotates in 90° steps for better reading
New, unique, force reduced material catching system
Automatic „Zero-Setting“ in each measuring position using a special sensor technique
4 Material memory locations for customer made calibrations
Calibration adjustment for fine tuning of the calibration if material differs from the used calibration material
Programmable MIN- and MAX alarms: indication in the display, if reading is out of limits
High speed data sampling (internal 8 kHz) and recording of MIN-, MAX-, last reading, PEAKS, average and standard deviation
Selectable units of measurement: cN, daN, g, kg, N, lb
Menu set-up in English or German language
Flexible menu set-up to meet operators demand
Some functions can be password protected
Note：Tension meter DTXE offers additional features, like interface, statistical evaluation on PC and a large internal memory.
Additional functions in comparison to basic instrument DTSE
Memory for 60.000 readings
USB interface
Tension meter DTXE with 5 different memory modes:
Mode S：statistics only
Mode H：storage of the X-Y-diagram for reviewing after finishing a series of measurement (e.g. short time spooling)
Mode C：continuous logging over a user set time and different series of measurement (2 Hz)
Mode F： fast, continuous logging over a user set time and different series of measurement (1000 Hz)
Mode D：storage of single readings and statistic
10 Material memory locations for customer made calibrations
Software Tension Inspect 3 for displaying real-time readings on a PC and to store them into a file
Wi-Fi module for wireless communication with a PC (optional)
Standard Features
Everything in operator's view:
– the guide rollers
– the measured material
– the readings
Filament guide and roller shifting mechanism ensure easy acquisition of the running material
Rubberized handle provides a secure hold in the operators' hand
Tension meter with rugged aluminium housing
LiPo accumulator (approx. 40 hours continuous operation) with AC adapter
CE certified, interference resistant against static electrifications
Certificate of Compliance with the order 2.1 according EN 10204 is included
Optionally available: Inspection Certificate 3.1 according EN 10204 with calibration report
Specification
| Model | Measuring Range | Resolution | Measuring Head Width* | Applications Textile Industry e. g. Yarn Count |
SCHMIDT Calibration Material PA** |
| DTSE-200 | 1 – 200.0 cN | 0.1 cN | 36 mm | max. 200 tex | 0.12 mm Ø |
| DTSE-500 | 1 – 500.0 cN | 0.1 cN | 36 mm | max. 500 tex | 0.20 mm Ø |
| DTSE-1000 | 10 – 1000 cN | 1 cN | 36 mm | max. 1000 tex | 0.30 mm Ø |
| DTSE-2000 | 20 – 2000 cN | 1 cN | 36 mm | max. 2000 tex | 0.50 mm Ø |
Specification
| Calibration: | According SCHMIDT factory procedure |
| Accuracy: | For PA from 5 % up to 100 % FS*: ± 0.5 % FS* ± 1 digit remaining tension range and other calibration materials: ±3 % full scale and ±1 digit |
| Memory for material curves: | 1 for SCHMIDT calibration plus 4 for customized calibrations |
| Measuring units: | Force (switchable): cN, daN, g, kg, N, lb Thickness (switchable): mm, inch |
| Overrange: | Approx. 10 % FS*, full scale, without accuracy guarantee |
| Overload protection: | 100 % full scale |
| Measuring principle: | Strain gauge bridge |
| Signal processing: | Digital, 16 bit A/D converter |
| Measuring frequency: | Max. 1 kHz (1000 measurings/sec.), intern 8 kHz |
| Measuring roller deflection: | Max. 0.2 mm |
| Display: | Graph LCD |
| 3 different displays: | Numeric, Numeric with bargraph, Numeric with graph (time-tension), |
| Display update rate: | Approx. 2 times per second |
| Memory: | MIN, MAX, PEAK, AVG and LAST |
| Damping: | Adjustable electronic damping (averaging) |
| Cal. Adjustment: | ± 10 steps in 1 % increment |
| Thickness compensation: | Max. 2.5 mm (not available for all models) |
| Auto power off: | Approx. 3 minutes of non-use |
| Temperature coefficient: | Gain: less than ± 0.01 % FS* /°C |
| Zero point: | Less than ± 0.03 % FS* /°C |
| Temperature range: | 10 – 45 °C |
| Air humidity: | 85 % RH, max. |
| Power supply: | LiPo accumulator (approx. 40 h continuous use), charging time approx. 3 1/2 h USB AC adapter 100 – 240 V AC with 4 adapters (EU/USA/UK/AUS-NZ) |
| Housing material: | Die-cast aluminium |
| Housing dimensions: | 329 x 78.5 x 60(mm) LxWxH |
| Weight, net (gross): | Approx. 780 g / 1460 g |
Specifications subject to change without notice!
