MST
Tension meter to control the tension at sewing machines as well as the take-off tension of shuttles
Electronic yarn tension meter with motorized take-up fixture for measuring and adjusting the tension of sewing machines to get best and highest quality stitched seams. Therefore e. g. yarn breaks can be adjusted under constant conditions (speed of the thread).
Features
Electronic yarn tension meter MST with motorized take up with tension range up fixture
The electronic tension meter ETX is the basis of this instrument
Motorized take-up fixture to have constant speed of the thread 9 m/min
Adjustable electronic damping for better reading when tension is constantly fluctuating
Vacuum base for positioning the unit on the work plate when tension is measured at the sewing machine
Special fixture to determine shuttle tension
Tension meter MST has a coloured, backlight TFT display with 3 different display modes
– numeric
– numeric with live bargraph
– numeric with graph (time-tension)
The display rotates in 90° steps for better reading
Tension meter MTS can be connected to a PC using the USB interface to monitor readings constantly on a PC
Memory for 60.000 readings
5 different memory modes can be selected by the operator:
Mode S: only statistical values per series are displayed
Mode H: storage of the X-Y-diagram for reviewing after finishing a series of measurement
Mode C: continuous logging over a user set time and max. 999 series of measurement (2 Hz)
Mode F: as C with higher sampling rate (200 Hz)
Mode D: storage of single readings and statistic
Model MTS can be connected to a PC with the USB cable. With the software SW-TI3-M »Tension Inspect 3« readings can be displayed, statistically analysed and saved. For more information see “Optional Accessories”[/rt_icon_list_line]
Selectable units of measurement: cN, g, N and lb
Very high data sampling rate (internal 1 kHz)
Storage of MIN, MAX, last reading, average and standard deviation per measuring interval
User-set MIN and MAX alarms with indication of TFT display if reading is out of limits
Adjustable electronic damping for better reading when tension fluctuates
Automatic “Zero-Setting” in each measuring position using a special sensor technique
3 separate calibration material memory locations for custom calibrations
Calibration adjustment for fine tuning of the calibration if material differs from the used calibration material
Menu set-up in English or German language
The electronic tension meter ETX is the basis of this instrument
Motorized take-up fixture to have constant speed of the thread 9 m/min
Adjustable electronic damping for better reading when tension is constantly fluctuating
Vacuum base for positioning the unit on the work plate when tension is measured at the sewing machine
Special fixture to determine shuttle tension
Tension meter MST has a coloured, backlight TFT display with 3 different display modes
– numeric
– numeric with live bargraph
– numeric with graph (time-tension)
The display rotates in 90° steps for better reading
Tension meter MTS can be connected to a PC using the USB interface to monitor readings constantly on a PC
Memory for 60.000 readings
5 different memory modes can be selected by the operator:
Mode S: only statistical values per series are displayed
Mode H: storage of the X-Y-diagram for reviewing after finishing a series of measurement
Mode C: continuous logging over a user set time and max. 999 series of measurement (2 Hz)
Mode F: as C with higher sampling rate (200 Hz)
Mode D: storage of single readings and statistic
Model MTS can be connected to a PC with the USB cable. With the software SW-TI3-M »Tension Inspect 3« readings can be displayed, statistically analysed and saved. For more information see “Optional Accessories”[/rt_icon_list_line]
Selectable units of measurement: cN, g, N and lb
Very high data sampling rate (internal 1 kHz)
Storage of MIN, MAX, last reading, average and standard deviation per measuring interval
User-set MIN and MAX alarms with indication of TFT display if reading is out of limits
Adjustable electronic damping for better reading when tension fluctuates
Automatic “Zero-Setting” in each measuring position using a special sensor technique
3 separate calibration material memory locations for custom calibrations
Calibration adjustment for fine tuning of the calibration if material differs from the used calibration material
Menu set-up in English or German language
