MAZF,MBZF,MAZD,MAZD,MBZB
Mini yarn tension sensor-slot installation saves space
Tension meter can be fixed on a mounting rail DIN EN 60715. Compact sensor with two different designs for continuous tension measuring of tensions in textile and fine wire with small guide roller with groove Ø 7.4 mm
Features
Each Model has 3 or 4 Tension ranges available, From 0 - 100 cN up to 0 - 1000 cN
Online tension sensor for measuring small tensions of threads and fibres up to 500 tex, as well as very thin wires up to Ø0.2 mm
Compact sensor with two different designs for continuous tension measuring of tensions in textile and fine wire with small guide roller with groove Ø 7.4 mm
Tension meter can be fixed on a mounting rail DIN EN 60715
Special Features
Tension sensor with integrated measuring amplifier and high accuracy of 2 % FS
MAZF, MAZD: Gently material path, it is guide over the rollers
Material incoming / outgoing angle 35° min
MBZF, MBZD, MBZB: Typical material path – warping the 3 rollers
MBZB :According to the application, different tape rollers with various roller widths from 7 up and 10 mm are available
The roller width must correspond with the width of the material to be measured
Various output signals
– analog: 0 – 1 V DC (standard), 0 – 10 V DC (optional)
– analog DMS: mV/V (optional)
Universal mounting possibility – easy to install, even afterwards, on existing machines: The sensor can be mounted using the three threads at the underside of the housing body. Alternative it can be fixed on a optional rail DIN EN 60715. A mounting adapter is necessary. Easy calibration to customized material by operator – zero and gain calibration is required Measuring principle – load cell with high quality strain gauge bridge
Standard Features
Supplied with a 2 m shield cable with open Ends (other cable length on request)
Tension sensor with aluminium housing
Certificate of Compliance with the order 2.1 according EN 10204 is included
Optionally available: Inspection Certificate 3.1 according EN 10204 with calibration report
Online tension sensor for measuring small tensions of threads and fibres up to 500 tex, as well as very thin wires up to Ø0.2 mm
Compact sensor with two different designs for continuous tension measuring of tensions in textile and fine wire with small guide roller with groove Ø 7.4 mm
Tension meter can be fixed on a mounting rail DIN EN 60715
Special Features
Tension sensor with integrated measuring amplifier and high accuracy of 2 % FS
MAZF, MAZD: Gently material path, it is guide over the rollers
Material incoming / outgoing angle 35° min
MBZF, MBZD, MBZB: Typical material path – warping the 3 rollers
MBZB :According to the application, different tape rollers with various roller widths from 7 up and 10 mm are available
The roller width must correspond with the width of the material to be measured
Various output signals
– analog: 0 – 1 V DC (standard), 0 – 10 V DC (optional)
– analog DMS: mV/V (optional)
Universal mounting possibility – easy to install, even afterwards, on existing machines: The sensor can be mounted using the three threads at the underside of the housing body. Alternative it can be fixed on a optional rail DIN EN 60715. A mounting adapter is necessary. Easy calibration to customized material by operator – zero and gain calibration is required Measuring principle – load cell with high quality strain gauge bridge
Standard Features
Supplied with a 2 m shield cable with open Ends (other cable length on request)
Tension sensor with aluminium housing
Certificate of Compliance with the order 2.1 according EN 10204 is included
Optionally available: Inspection Certificate 3.1 according EN 10204 with calibration report
